KEF R500 Speaker Plinth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
KEF R500 Speaker Plinth
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
Plinth for KEF R500 speaker. I have not tested it.
Three versions uploaded. All have 133.35mm between the screw holes. Each version has a different speaker width which is notated in the file name.
It has to support a lot of weight so print with at least 10mm thick walls. I recommend using PETG filament. Supports are not needed. A brim would be smart if your print bed is not enclosed.
Use M8 screws to attach the plinth to the bottom of the speaker. Install the brass inserts linked below (size M8 x 15mm) at the ends of the plinth, which will support whatever M8 speaker spikes or feet you want to use.
https://www.amazon.com/dp/B0CNLP5S36?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1