Sega Dreamcast VMU Holder v2.0
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New and improved VMU holder!
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 122
- Wydruki
- 1
- Wyświetlenia
- 1030
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
The best way to store and display up to 10 Dreamcast VMUs or memory cards! Completely redesigned from the ground up, my new VMU holder has slots with a snugger fit, snazzy rounded corners, and a new customizable design for the front.
Two different versions are available:
vmu-holder: The VMU holder all as one single print.
vmu-holder-no-btns: The VMU holder with slots to put the buttons and screen which can be printed in different colors. Just use some glue to keep them in place.
vmu-holder-glowscreen: LED mod version (more info below).
vmu-holder-glowscreen-switch: LED mod version with additional slot for a switch (more info below).
It's also very easy to make your own “screen”. It's just a 30x25x1mm rectangle with a design cut out of it.
LED Mod Info:
The "glowscreen" version of this model includes a path to run wires from a CR2032 battery holder on the back to a "micro litz" LED behind the screen. The screen in this case would be a lithophane (chao_litho.stl in the files or make your own at the link below).
Things you need:
Button Cell Battery Holder and CR2032 Battery
I recommend facing the LED backwards against a square of tinfoil to spread the light more evenly behind the litho.
You can make your own litho here. Make it 30x25x2mm. It sticks out a bit due to the extra thickness but it makes the effect much clearer. The lithophane should be printed in white for the best effect.
Be sure to post your makes! If you like the design, please consider tipping on Ko-fi. Thank you! :-)