Apple of Eden – Assassin’s Creed II Replica
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Apple of Eden from Assassin Creed 2
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 183
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the iconic Piece of Eden from Assassin’s Creed II, this model recreates the mysterious spherical artifact as a clean, display-worthy prop. Designed to look great straight off the printer and even better after finishing, it’s perfect for collectors, cosplay, or display shelves.
Print Details (as shown)
Material: Anycubic Gray PLA
Layer Height: 0.16 mm
Result: Smooth surface with minimal visible layer lines and excellent paint readiness
The neutral gray PLA was chosen intentionally — it highlights detail while acting as an ideal primer base for metallic, gold, or aged patina finishes.
Features
Clean symmetrical sphere optimized for FDM printing
Balanced geometry to reduce seam visibility
Designed for easy sanding & finishing
Accurate proportions inspired by the in-game artifact
Great for painting, weathering, and LED mods
Recommended Print Settings
Layer Height: 0.12–0.20 mm (0.16 sweet spot)
Infill: 10–15% (Gyroid or Cubic)
Supports: Not required (depending on orientation)
Wall Count: 3+ for sanding durability
Seam Position: Back or aligned
Finishing Suggestions
For a realistic ancient artifact look:
Light sand (320 → 600 grit)
Filler primer
Metallic gold or brass paint
Brown/black wash for depth
Optional green patina dry-brush
You can also split the model to add LEDs for a glowing Apple effect.
Perfect for Assassin’s Creed fans, prop builders, painters, and display collectors.
If you print one, I’d love to see your finish!
Sitting on this base:
