1 / 1
Core one Rear vent adapter Remix 8x2mm  100mm tube — zdjęcie 1

Core one Rear vent adapter Remix 8x2mm 100mm tube

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the design made by James Lawson. 8x2mm magnets, extra little rim

Ocena
0 / 5
Polubienia
3
Pobrania
14
Wydruki
0
Wyświetlenia
121
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Printed in PETG (no support was needed)

15% cubic infill

0.2mm height

i used 8 8x2mm magnets (make sure the poles are facing the correct direction before you push them in)

4x 10mm M3 caps like the original creator suggested.

I also bought a non return valve and pressed it on to the adapter so air doesnt go back in.

Tagi