Gear wheel for INDUSTREX M37 Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The drive gear for the first section is the film reception section.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a model of the drive shaft gear for the Industrix M37 Plus machine. The first section is for receiving film. We use this machine for developing X-ray images, and we've encountered a problem where the gear constantly breaks down. I've modified the original gear and strengthened it by increasing the thickness of the walls. I hope this model will help you and last for a long time. My sample has been tested on over 1000+ images.
Installed and operates in the laboratory of non-destructive testing of welded joints in the room production.
PETG, Infill 70%-90%, 5 walls, layer 0.2