Purge Waste Ramp Centauri Carbon 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Centauri Carbon 2 Rear Waste Ramp: high-angle slope prevents clogs. Print in PETG/ABS/ASA
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 820
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
Upgrade your Centauri Carbon 2 with this optimized purge waste ramp. Designed specifically to handle poop/purge material more efficiently than the alternative solutions, this ramp ensures your printing area stays clean and jam-free by directing waste safely to the rear of the printer.
Why this design?
Many existing ramps suffer from a shallow incline, causing purge material to stack up and eventually clog the chute. This version features an increased steep angle specifically engineered to prevent "hang-ups." The steeper geometry uses gravity to its advantage, ensuring every purge slide hits the bin every single time.
Required Accessories
To complete the setup, you will need a collection bin (waste box) placed at the exit of the ramp. I personally use bins available at new-plastic.it, which fit perfectly with this rear-exit configuration.
Recommended Print Settings
To achieve the best results, material choice is key:
Recommended Material: PETG,ABS or ASA.
Perimeters: 3
Infill: 15-20% is more than enough.
Supports: Minimal or none (depending on your orientation).
Key Features
Rear Discharge: Keeps the front and sides of your printer clean.
Anti-Clog Geometry: High-angle slope prevents purge buildup.
Perfect Fit: Designed specifically for the Centauri Carbon 2 frame.