Cat fountain Skirt/brim + cable hider - 200mm fountain diameter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was designed to prevent my cats from knocking over their water fountain + chewing on the cable that powers the pump
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
My cat loves attacking the water fountain we bought for him. This has resulted in him knocking off the lid, yanking on the wire that runs the pump and spilling it all over the floor.
I made this skirt to hide the pump cable so it isn't easy for the cat to chew on and by making it a wide brim. The base is held in place by the cat as he stands on the brim attempting to knock the fountain over, thus defeating his own goals without even realizing it.
This is a 4 piece multi-part print. Took me about 9 hours using a Bambu Labs P2S, then I glued it together using hobby Super glue.
Dimensions:
The inside of the brim (where the fountain sits) is 200mm
The outer diameter is 420mm.
the height is 60mm
except where the cable hider is and that's about 100mm tall.
The Brim thickness is 10mm
