2026 IEF Junkyard Wars Game Pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Game Pieces for the 2026 IEF Junkyard Wars competition.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Public Domain
The Hanger of the Crane is best printed with a brim to prevent any warping on the thin edges and needs support for the hole that will receive the stand.
The Mine Top Base should be printed with the top-facing surface on the build plate to eliminate the need for supports.
Both Mine Base pieces can be printed with adaptive layer height to help smooth the curvature.
The Mine holder should be able to be printed without support with the curve facing up.
The Mine Chain should be printed with 2 edges of links resting on the build plate on its side, looking down the chain from the top or bottom you should see an X shape made by the links. Add a brim for better adhesion.
The rest of the parts should be fairly self-explanatory for expected print orientation.
The pin and peg parts each require 2 pieces for each corresponding obstacle.