1 / 3
Stubby nozzles for Makita DUB361 or XBU01 — zdjęcie 1
1 / 3

Stubby nozzles for Makita DUB361 or XBU01

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

2 stubby nozzles for Makita leafblower DUB361 or XBU01

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
84
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

I designed 2 nozzles for our DUB361 Makite leafblower to make a bit more useful. Especially for cleaning snow and another heavier materials and potentially for drying.

One round and one flat shape available. Dont use the original locking mechanism as that would too problematic to 3D print. Friction fit is used which is strong enough.

The round one should not cause any issues for the blower itself. The flat one restricts airflow more resulting in even more pressure but with higher battery consumption. 

Basically any material can be used for printing and no supports are required. Depending on your elephant foot setup some de-burring might be needed. Fusion files provided to allow further customization.

Tagi