T-Nut Clamp Set and Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-nut clamp set with case
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 244
- Wydruki
- 0
- Wyświetlenia
- 1286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
T-nut clamp set with case
Print instructions
Printed using Hatchbox PLA. Toe clamps printed on their side utilizing 3 perimeters with 50% 3D cubic infill. Because they are printed on their side you may want to add support to the bridge inside of the clamp slots. I also printed the clamp block on the their side with 3 perimeters and 50% 3D cubic infill. The housing was printed with 2 perimeters and 25% rectilinear infill.
I am using these clamps for light clamping on a metrology fixture for measuring parts with a Faro Arm. If you intend to utilize these for higher clamping forces you may want to consider changing materials.