Mac air m4 case SCALED DOWN
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a mac case with holes a builtin stand so you can raise it off the table, cooling. SCALED DOWN
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 46
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- GNU General Public License v3.0
Print all pieces once, except for the pintle and stopper. Those need to be printed twice. Then, take the flat fold piece. This is the one with rings on both sides. Lay this FLAT on the table. Next, take the case. With the depression for the mac to go into facing UP, and the case going OVER the flat fold, intertwine it's rings with the flat fold and hold it in place using a PINTLE AND STOPER. Next, take the vertical fold and make the flat side point OUTWARD, away form the case. Then intertwine it's rings with the otehr end of the flat fold and use PINTLE AND STOPPER to connect them