1 / 11
Könner & SÖHNEN KS 5500iEG S Battery replacement holder — zdjęcie 1
1 / 11

Könner & SÖHNEN KS 5500iEG S Battery replacement holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Model for replacing factory battery with Skyrich Lithium HJ01

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
42
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is holder for alternative/replacement battery Skyrich Lithium HJ01 that would replace original manufacturer made starting battery which is expensive and unobtainum everywhere.

This model offers option to install a bit cheaper Skyrich Lithium HJ01 in the K&S 5500iEG S dual fuel generator. Also battery has higher capacity than original so it sould last longer.

You will need:

  • Rubber band from original battery holder

  • One M6 screw at least 22mm long, prefferably with hex head to secure holder in the generator

  • One M4 screw 10-12mm long with counter-sunk head for securing the 2nd standoff

  • Cable with SAE connector since original is too short, you can get it on aliexpress/amazon or any electronics store

Be sure to verify the battery polarity against the original before you connect it to the generator!

Tagi