1 / 13
Oral-B Quad Toothbrush Station – Integrated Charger & Drip Tray — zdjęcie 1
1 / 13

Oral-B Quad Toothbrush Station – Integrated Charger & Drip Tray

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A sleek, organizer for families using Oral-B electric toothbrushes. Features a central dock for the original

Ocena
0 / 5
Polubienia
10
Pobrania
58
Wydruki
0
Wyświetlenia
281
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Description

This is a custom-designed vanity organizer for Oral-B electric toothbrushes. After struggling with messy counters and falling toothbrushes, I designed this station to hold four brushes and the standard inductive charging base in one compact unit.

Key Design Features:

  • Central Charger Dock: Precisely sized to friction-fit the standard Oral-B charging base.

  • Four Handle Slots: Wide enough to accommodate various Oral-B handle generations (Pro, Smart, and Genius series).

  • Integrated Drip Management: The internal base is designed to catch excess water, preventing "calcium rings" on your bathroom countertop.

  • Stable Footprint: The low center of gravity ensures the station won't tip over when loaded with four brushes.


Technical Specifications & Print Settings

To ensure hygiene and longevity in a wet bathroom environment, I recommend the following:

  • Material: PETG or ASA is highly recommended. These materials are more resistant to bathroom cleaning chemicals and moisture than PLA.

  • Layer Height: 0.20mm (standard) or 0.28mm (draft) both work well.

  • Walls: 3 perimeters for a solid, watertight feel.

  • Infill: 15% (Grid or Gyroid).

  • Supports: None required. The geometry is designed to be printed as a single piece without any support material.

  • Cleaning Note: If printed in PETG, this can be easily cleaned with warm soapy water.


Installation

  1. Thread your Oral-B charger cable through the central hole.

  2. Press the charging base into the center circular slot (it is a snug fit to keep it from lifting when you grab your brush).

  3. Route the cable out the back/bottom notch.

  4. Place your brushes in the four surrounding slots.

Tagi