Magnet Lid MTG Deck Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I set out to make a deck box for my commander decks.
I have seen plenty of great designs out there. I started with other models, but nothing worked out the way I wanted them to.
I came up with this idea where the deck is laid on its side. I had an idea to use magnets, but all my previous designs just didn't work the way I envisioned. This design has cut outs at the top and bottom of the deck that fit small D6 or other token pieces (like the carboard cut outs from pre-releases and Pre-Cons)
I hope others like this design.
I used a Bambu P1S to print mine. With a print time at about 2 hours and 45 minutes total.
I used 8mm by 3mm magnets. 4 on the top and 4 on the box itself.