Buildable Escher-Platonic Polyknots (and Polylink) with Archipanels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You can construct 4 of the 5 Escher-Platonic polyknots and polylink sculptures with these components.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Share Alike
With these four components you can make three different Escher polyknots and a polylink. The Escher dodecahedral polyknot component will come later. The triangle Archipanel and square Archipanel by jdanders are included for convenience and are in the CC.
Recommendations:
For the triangular pyramid set it on its base with a height of 46.5mm and then reposition to its side to print with tree supports.
For the square pyramid set it on its base with a height of 46.0mm and then reposition to its side to print with tree supports.
The Archipanels and the arm should be at 3.38 mm z-axis setting.
To make the Tetrahedral polyknot you will need:
4 triangular pyramids
12 hinged arms
4 triangular Archipanels
To make the cubic polyknot you will need:
6 square pyramids
24 hinged arms
6 square Archipanels
To make the octahedral polylink you will need:
8 triangular pyramids
24 hinged arms
8 triangular Archipanels
To make the icosahedral polyknot you will need:
20 triangular pyramids
60 hinged arms
20 triangular Archipanels