Thwakahawk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a new Thwack! and wanted to get rid of the ball end, since it does not have a purpose in 3D printing. But a…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I needed a new Thwack! and wanted to get rid of the ball end, since it does not have a purpose in 3D printing. But a hatchet can be used instead of a spatula in many cases!
You can add M8 screws (65mm and 45mm) and nuts into the provided cavities to give it more weight or use sand or metal BB's to make it into a dead blow hammer. I used 2part expoy glue to fit it together, the bolts help in that case as registration marks.
And yes, i left out the "c" from Thwack! intentionally, because the word was to long to fit on the handle in font large enough...
Print Settings
Supports:
No
Resolution:
0,24
Infill:
33
Notes:
I used 6 walls to make it really sturdy, but that's up to you ;)
Category: Hand Tools