Rokenbok LEGO Compatible Motor Mounts and Gears
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of parts to incorporate LEGO motors. This is a work in progress, changes will be made in the future.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The idea for connecting LEGO motors to Rokenbok came from wanting a X2 to power some builds. Unfortunately they can be hard to find and when there is one available they tend to be a little pricey. LEGO power function motors tend to be reasonably priced and if you aren't to picky there is knock off versions of all the power function components for even cheaper and in my opinion work just as good as the real thing.
I have plans to add more models in the future and to also tweak/improve existing models as I experiment with different builds.
Any model with a snap should be printed standing up, the snaps are much weaker if the model is printed laying flat. Supports are only necessary for the snaps, I haven't had any issues with the holes for the motor mounts during my test prints (PLA is the only material tested so far).
The "raised" large motor mount is intended for anything with weight. The other mounts tend to sag a bit when a motor or other heavy part is connected. The "flush" mount takes up a little less space which can be helpful depending on your build.
This is a work in progress, models will be updated to v2 when changes are made.