Protective plates for light ring and camera cases - Autodarts Dart camera setup / V2 IS LIVE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are removable plates that cover the light ring and the camera cases where they are most suseptible to get hit.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is not a remix of the design but are protective plates (6 smaller ones, 3 larger ones that match the same size as the segments on the light ring) that covers the light ring and the part of the camera cases that are most susceptible to get hit by steel tip darts. After they're marred enough, simply print another one, remove the old one and attach the one.
These Use nano tape or Velcro to attach them which gives the added benefit of a buffer so it reduces shocking the light ring and causing errors in Autodarts.
Print 3 x RingLight-LongPanel
Print 6x RingLing-ShortPanel
Print 3 x CamraCase-Panel
Made using PLA+ (PLA and PETG should be strong enough)
0.4 nozzle
Use 100% solid infill
Everything else can be set to default
Removable adhesive such as nano tape or Velcro that doesn't leave behind residue