1 / 2
Mclaren Logo Trophy
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trophy modeled off of the Mclaren logo.
- Ocena
- 5 / 5
- Polubienia
- 47
- Pobrania
- 248
- Wydruki
- 5
- Wyświetlenia
- 1158
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 5) (Komentarze: 5)Remiksy (0)Kolekcje (49)Powiązane
Wanted to explore the technique used to make my previous Formula 1 Logo trophy, so I decided to make one for Mclaren!
Printing
I was able to print all parts with no support and a 0.2mm layer height. The stl files are labeled with the colors they should be printed in to keeps things easy.
Assembly
I was able to press fit all of the orange upper section into the lower black section a small amount of pressure. No glue was required. If you run into issues assembling your model I would suggest adjusting the scale of the lower section.