Replica of Grenadier Halflings 2002B Miniature
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replica of figure B from the box "Halflings", number 2002 from Grenadier (see…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- People
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replica of figure B from the box "Halflings", number 2002 from Grenadier
(see http://www.cs.cmu.edu/~tpope/sol/grenadier/images/2002.jpg )
Reproduced using https://www.thingiverse.com/thing:1762299
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Ultimate
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
25%
Filament: eryone PLA brown
Notes:
This one is a pain to print.
The bow definitely needs supports, but you have to use extreme care when removing the support material or the bow will break.
I included a second model file that is 'manifold' in case you want to try printing him on his side. It works a bit better, but doesn't really solve the problem.
Print at 105% to match original.
Set Z = -0.3 mm if you print standing up, and also add support blocker to the head to keep the face free of supports (see image).
I think you could extrude some material, and while it is hot attach it to the ends of the bow and his hand, to make a bowstring.
Good luck!
Post-Printing
Be very careful removing supports from the bow or it will break.
Category: Scans & Replicas