Isobutane Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A TPU ring that snaps onto the bottom of a fuel canister to protect it and the container its in.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I was tired of hearing my fuel canister bounce around inside of my ultralight backpacking cook kit so I printed a TPU ring to go around the canister base, it deadens the sound and adds extra grip while cooking on smooth surfaces.
I checked it on the canisters at the local sporting goods store and it should fit on all 4oz canisters.
I printed it from cheap 98A TPU that I had around from another project with the following settings.
.20mm Structural
0% Infill (Its so thin I don't think it has any infill)
Ironing enabled on the top surface only
10% Overlap
1 Perimeter
Random seam position
0 Top solid layers