Wall E and EVE 3D printer skins/signs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple signs to help you distinguish between two identical 3D printers
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
When the makerspace I work for purchased a second Bambulab X1C printer, we needed a way to distinguish the two printers. Hence we decided to name the printers after characters from the pixar movie Wall E, and I made these magnetic signs to put on the printers. These signs could also be used for any other purpose I guess, and could probably work for any other printer with a metal body that is magnetic.
In this model I included both an AMS profile and a profile to print all the pieces individually. In the case of the non AMS profile, you will probably need to glue the pieces together.
Additionally, I put some holes in the bottom of the signs to fit 10 x 3 mm circular magnets. The fit is a little tight, and the magnets sometimes don't hold the signs to the printer very well. In my case, I put some electrical tape over the magnets to make it harder for the sign to slide when attached to the printer. It also might work better to just use double stick gel tape to affix the signs.
I also included the blender files I used to generate this design in case you would like to modify the design for yourself