Elegoo Centauri Carbon 2 CC2 Exhaust Carbon mat filter housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
magnetic housing to hold 2 sheets of carbon filter mat to help tame smells when printing ABS
- Ocena
- 4,667 / 5
- Polubienia
- 78
- Pobrania
- 283
- Wydruki
- 0
- Wyświetlenia
- 2063
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
at the end of a ABS print the vent fan kicks in to lower the chamber temperature, it runs it through the carbon filter inside but that thing is extremely limited in capacity. I made this to accept 1 to 2 sheets of the carbon filter material for home air filters to significantly help with odor and VOC adsorption.
it uses 6mm magnets. 6mm deep holes so you can stack 2 6x3 magnets to get a stronger draw, or 3 of the 6x2 magnets. they fit tight so you should not need glue.
If your magnets are not exactly 6mm or your printer filament is not tuned for dimensional accuracy they may not fit, FreeCad source code file included so those holes can be enlarged for supporting other magnets.