1 / 7
XY7025S DC Buck Converter Enclosure (Board + LCD Case) — zdjęcie 1
1 / 7

XY7025S DC Buck Converter Enclosure (Board + LCD Case)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

XY7025S enclosure: mounts board+LCD, vented cooling XY6550S

Ocena
0 / 5
Polubienia
6
Pobrania
45
Wydruki
0
Wyświetlenia
232
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This enclosure was designed for the XY7025S DC buck converter/power supply module, which I purchased from AliExpress. The module does not include a case, making it awkward and unsafe to use as a bare board, so I designed this custom enclosure to properly house the main board and LCD and make it practical for real use. I’m sharing the design so others using this power supply can print a clean, protective case as well.

The enclosure was printed using Fiberon Carbon Fiber ASA for improved strength, heat resistance, and durability. Tree supports were used during printing where needed. Assembly uses standard M3 × 15 mm button head screws, and no heat-set inserts are required — the mounting holes are sized so the screws can be driven directly into the plastic (3 mm holes) for a secure fit. TPU was used for the feet to provide grip and vibration isolation. Use any filament you have in stock.

Tagi