Rushed fix for LM2596S Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Yet another case for a variation of the LM2596S buck converter - remix of model by Michael Hood
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 53
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
!! Stick your buck converter next to the image to make sure everything lines up. If it doesn't, check out the original model by Michael that I remixed or look elsewhere. !!
If you have the same board as the image and haven't already printed the base for this model, try out this model instead. You will have significantly less inserting and lining up issues: https://www.printables.com/make/1115259
--
The LM2596S has so many variations around, and the companies who print the board keep changing how the parts are arranged for whatever reason. This is a fix to the lid so I can use the same base as I had printed ~10 of them before it got changed again.
I didn't modify the base model much, so it's a pretty tight fit to get the board in. Keep this in mind before printing multiple, you may have to scale and tape down if needed, but if you adjusted your printer right it should just barely go in. I wouldn't really use this remix unless you already printed the base of the OG model by Michael Hood.
I don't have any precise measuring tools or much modeling experience, but I got everything to line up somewhat by overlaying an image of the model. If you can do better please remix the original lol. Again, this is VERY rushed.
Buck converter purchased: https://amzn.to/3PYNeAx