Speed Rims yoyo by Cutting2crew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
is my version of a tire/wheel yoyo
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 88
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here I 'am again with my latest yoyo that l've been sitting on for a couple months, Speed Rims.
Speed Rims is a yoyo that is 3d printed from 4 pieces instead of 2, the yoyo consist of 2 rims and 2 wheels/body. l made more than 4 separate rim designs that all fit exactly the same other than looks. l've also made 2 separate wheel/tire designs, one is a rounded shape while the other is butterfly shaped.
Printing; The rims should be printed at about 10-15 grams for both halves as it shouldn't be to heavy, also include supports for underneath the rims. The wheel/tire should be printed either 15 grams or 25 grams since most of the weight is around the rims of the body which increases power and spin, the body should be printed words up.
Gluing; please look at the last 2 pictures to see where you should glue. a neat feature l made to connect the rims and body together was a hex nut pattern to increase the strength of the 2 pieces together and to keep it from spinning in place. let glue dry at least 2 hours to guaranty a solid connection between the body and rim before trying to fit and glue the axle.
Axle; As per usual I used an oak 1/4 dowel rod from Lowes. please note any 1/4 wood dowel rod will work, i just don't like the generic wood dowel rods from Walmart and Michael's since there dowel rods are low quality and are made of wood particles. measurements for the axle should be between 1.3 inches and 1.27 inches.
Please show me your makes of your Speed Rims as l'd love to what options and combinations people will use. also please let me know if there are any problems you've found or have any questions, l'm more than happy to help.
Butterfly V7 was made as an easier to print version of Butterfly V4. My A1 Mini was having a hard time with the chamfers l made by having a very noticeable layer line in every butterfly version l made so l tried making the last iteration to be as easy as possible to print but l didn't have much success, but your mileage may very.