Oh Bubbles! AllFizz bottle and nozzle holder

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store

A stand to hold two empty Oh Bubbles! AllFizz (a great alternative to SodaStream if you live in New Zealand or Australia) bottles, their lids, and the nozzle cap.

Print setup:
- 0.6mm nozzle recommended but not required
- Brims may be useful, use your judgement
- Supports not required
- Use any rigid material you like

Print two copies each of the Lower Holder and Upper Holder. Print one copy each of all other parts.

You will also need:
- 2x M3x20 screw, cap head, hex socket
- 2x M3x12 screw, cap head, hex socket
- 4x M3 hex nut
- An allen key that fits the screws (NOT a screwdriver - it won't fit)

Assembly:

1. Insert hex nuts (2) into the slots on the back of the tall vertical beam of the base.

2. Insert hex nuts (1 each) into the slots of ONE copy each of Lower Holder and Upper Holder

3. Use an M3x20 screw to attach the two Lower Holders to the lowest attachment point on the middle pillar of the tower structure. Note that these are not vertically symmetrical; they should be attached the same way up as they are in the files.

4. Use another M3x20 screw to similarly attach the two Upper Holders. It does not matter which way up these ones are facing.

5. Use an M3x12 screw each to attach the lid holder (lower attachment point) and the nozzle cap holder (higher attachment point) on the front of the tower. Like the Lower Holders, the orientation matters for these parts.

Warning: This is NOT in any way designed to hold full bottles. It's for empties only.