ERCF Back-Panel Mounts for Voron 350 mm

ERCF Back-Panel Mounts for Voron

This is a clean and sturdy mounting solution for attaching your ERCF (Enraged Rabbit Carrot Feeder) directly to the back panel of a Voron printer. Designed with the signature Voron honeycomb aesthetic, these mounts ensure stability while keeping your multi-material setup organized.

### Features

• Integrated Honeycomb Design: Matches the Voron V2/Trident design language.

• Rock-Solid Mounting: Dual-mount system to prevent sagging or vibration during high-speed filament swaps.

• Optimized Clearance: Positioned to allow for clean PTFE tube routing and easy access to the ERCF internals.

### Print Settings (Recommended)

To ensure the parts can handle the weight and tension of the ERCF, follow these standard Voron printing guidelines:

• Material: ABS or ASA (for heat resistance and durability).

• Layer Height: 0.2mm.

• Wall Count: 4 or more.

• Top/Bottom Layers: 5.

• Infill: 40% (Gyroid recommended).

• Supports: No supports required (designed for easy printing).

### Assembly Instructions

1. Prepare the Mounts: Insert M3 heat-set inserts (if your design uses them) into the mounting holes on the brackets.

2. Attach to Panel: Align the mounts on your back panel. Use M3 screws and nuts (or T-nuts if mounting to the frame extrusions through the panel) to secure the brackets.

3. Mount the ERCF: * Slide the ERCF unit into the brackets.

   • Secure the ERCF using M3x8 or M3x10 screws through the pre-drilled holes in the mount.

4. Final Check: Ensure the PTFE tubes have a smooth path to the toolhead without sharp bends.

### Bill of Materials (BOM)

• Printed Parts:

  • 1x Left Mount

  • 1x Right Mount

  Fasteners for Frame Mounting (Mount to Voron frame):

  • 6x M3 T-nuts

  • 6x M3 Bolts (e.g., M3x10mm)

  Fasteners for ERCF Mounting (ERCF to Mounts):

  • 4x M3 Heat-set inserts (Voron standard size)

  • 4x M3 Bolts (e.g., M3x8mm or M3x10mm)