Sammelfach für Kleinteile - Collection tray for small parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sammelbox für mit Scharnier und Friktionsverschluss - Collection box with hinge and friction closure
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Eine Sammelbox für Kleinteile. Aufgrund der Schrägung in den Fächern lassen sich kleine Teile leicht entnehmen.
Bei den herkömmlichen Boxen sind meist die Finger zu groß um die Kleinteile fassen zu können. Mit den abgeschrägten Fächern geht das viel einfacher.
Das Deckelscharnier habe ich mit einem Stück Kupferdraht mit 1,5 mm² (AWG16) fixiert. Der Verschluss der Box ist ein Friktionsverschluss, der die Box auch gut geschlossen hält.
Während des Druckens ist mir leider der Thermistor des Hotends kaputtgegangen, deshalb ist der Druck nicht optimal geworden.
Gedruckt habe ich alles in PLA mit Standardeinstellungen.
Viel Spaß beim Drucken. Über Makes und Likes würde ich mich freuen
A collection box for small parts. The slanted compartments make it easy to remove small parts.
With conventional boxes, your fingers are usually too big to grasp the small parts. The slanted compartments make this much easier.
I secured the lid hinge with a piece of 1.5 mm² (AWG16) copper wire. The box has a friction closure that keeps it securely closed.
Unfortunately, the thermistor on the hot end broke during printing, so the print did not turn out perfectly.
I printed everything in PLA using the default settings.
Have fun printing. I would appreciate any makes and likes.