Pro-Grade Tablet & Phone Stand (Ultra-Compact • Rock-Solid • 17 Angles)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ultra-compact 17-angle tablet/phone stand: rock-solid stability, travel-lock magnets, smooth M3 hinges, zero wobble.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
Pro-Grade Tablet & Phone Stand (Ultra-Compact • Rock-Solid • 17 Angles)
A compact, travel-ready stand that feels like a real product — not a wobbly print.
This design folds down to just 150 × 150 × 15 mm, yet opens into a seriously stable tablet/phone holder with zero jiggle during tapping, typing, or swiping.
pin.STEP added so anyone can adjust depth and overall size
Key features
17 angle positions total
14 angles for tablet mode (from shallow/almost flat to near-upright)
+ 3 additional angles optimized for phone-only use
Extremely sturdy & stable: holds virtually any phone or tablet securely with no wobble or flex.
Compact footprint, perfect for travel: lightweight, strong, and easy to pack.
Magnetic folded-lock: 4× 6×3 mm magnets snap together when folded so it cannot unfold on its own in a bag.
Premium hinge design: M3 screw hinges provide smoother, stronger, and more reliable operation than printed pins — and stay tight over time.
Replaceable bottom supports (for thicker devices)
The bottom “support pads / retainers” are removable and replaceable, so you can swap them if your tablet is thicker (case, rugged cover, etc.). They’re designed and oriented for maximum strength along the load axis — exactly where the tablet pushes.
Hardware / BOM (only 2 types of parts)
4× 6×3 mm round magnets
4× M3×12 mm screws
That’s it — magnets and screws are the only hardware used.
Printing (recommended settings)
Everything can be printed in PLA or PETG. For ultimate peace of mind with hot tablets (charging heat, summer temps), print the back/holder part in ABS or ASA.
Strength-first settings (recommended):
8 perimeters / walls
8 top layers + 8 bottom layers
These settings maximize stiffness and make the stand feel “pro-grade”, especially around the hinge and load-bearing areas.
✅ STL files are already properly oriented for printing — just import and print.
Assembly (quick + simple)
Install the magnets (match polarity so it snaps closed correctly).
Assemble the hinges using M3×12 screws.
Snap in the bottom supports (swap to thicker ones if needed).
Enjoy a compact, premium stand that’s built to last.