1 / 3
HO Scale Gunderson Well Car Male Bolster — zdjęcie 1
1 / 3

HO Scale Gunderson Well Car Male Bolster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The male end of the connector on the Athearn HO Scale Gunderson Well car

Ocena
0 / 5
Polubienia
2
Pobrania
29
Wydruki
0
Wyświetlenia
190
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I have an Athearn HO Scale Gunderson Well car that had a broken bolster (the connector between the cars), so I figured I'd try to 3D print one.  The model is not exactly the same as the original, but it is functional.  This file is for the male portion on the connector.

The prototype (white one) was printed with PLA as a proof of concept.  The red one on the left is the model and the one in the middle is the original.

Because of the size of the part, I printed it using a 0.25 nozzle using PET and ABS.  Believe it or not the ABS version came out better for me.  Of course your mileage may vary.