120mm Fan Spacer (5mm) Shroud w/side tabs (v2 Fixed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
120mm fan shroud that's 1.225 inches tall, for smaller spaces. Also has tabs on the sides to mount other shrouds
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
120mm fan shroud that's 1.225 inches tall, for smaller spaces. Also has tabs on the sides to mount other shrouds together, basically to make 240 or 360mm shrouds. I haven't got around to testing yet cause I'm waiting on filament. If used by any heat source use PC, ABS, ASA, or PETG. Otherwise PLA should be fine. Also it has 1/4-20 threads, so any bolt of that sort should hold them together.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
.18
Infill:
20%
Category: DIY