1 / 5
Britax Roemer Stroller Cup Holder Easy Print (Smile III) — zdjęcie 1
1 / 5

Britax Roemer Stroller Cup Holder Easy Print (Smile III)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Britax Smile III Stroller Cup Holder, easy print & assembly. I expect it to work also with Smile 5Z, Strider M.

Ocena
0 / 5
Polubienia
1
Pobrania
25
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I was looking for cup holders for Britax Roemer Smile III, but I found that they could not be optimally printed (no supports, optimal layer direction etc. Therefore I designed this version comprised by 4 parts that can be printed without supports and can be assembled without any tools (a file may be needed to remove the integrated brim in 2 parts).

List of parts

  • Ring: main structure that attaches to the stroller

  • Frames A & B: U-shaped parts that actually hold the cup/bottle. I struggled with bed adhesion with these parts due to the shape and size, therefore I added some extra 0.2mm brim on the corners. These can be removed with pliers and file. If you do not expect adhesion issues, you can use the files "_NoBrim"

  • SealRing: L-profile ring that tops the assembly and locks the Frames A&B together with the ring.

Print tips 

  • Print Ring "upside down" with the mounting hole facing up. 

  • Print SealRing "upside down" with the wider flange on the build plate.

  • I enjoyed using "Concentric" Top and Bottom fill patterns for better esthetics.

Assembly

I expect the process to be "obvious" but:

  • Position one of the Frames matching 2 of the cuts in the Ring.

  • Position the other Frame  matching both the cut in the 1st Frame and the 2 other cuts in the ring. 

  • Lock everything in place with the SealRing from above. This may take some effort due to tolerances. Just make sure that the entire ring slides at the same time (avoid that one side goes in together. 

This is just the 1st version. If something does not work, let me know!

Tagi