Shower drain hair catcher cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shower drain cover to catch hair and debris that'd clog your shower drain. Slips over existing floor drain.
- Ocena
- 5 / 5
- Polubienia
- 60
- Pobrania
- 531
- Wydruki
- 2
- Wyświetlenia
- 2665
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Hair clogging your shower's drain? Here's a cover that slips over the existing drain of your shower, but with tiny holes. Rather than sitting flat on the existing cover, it's raised a few millimeters so that water can flow through all of the holes, and into the drain below.
This cover is designed for a 115mm diameter shower drain, and is 5mm high. The OpenSCAD program used to generate it is provided, and you could tweak the numbers to fit if you need a different size than the STL file that's provided.
Printed with PLA, 0.3mm layers, probably not critical. No supports.
[2022-07-21] New! Improved! Version 2 with a couple of insets for disc magnets. Solve the problem of the cover lifting and floating on soap bubbles under the cover. I used UV curable resin material to affix the magnets and also encapsulate them from the water. I don't know if these magnets will rust or not; we'll see! It's certainly possible to use some other adhesive for the same purpose. Alternatively, re-generate the object with smaller holes for a “press-fit” vs. glue alternative.