Gandalf the shaved - Henson AL13 razor stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you ever wanted a wizard to hold your razor then this model is for you :)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 92
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted a razor stand for my AL13 safety razor that was a bit more fun and thought the Gandalf model made by Erenirga - Gandalf Cartoon Figure (https://www.thingiverse.com/thing:6236884) was perfect for this. All credit goes to this creator, i mostly just added a hole and mutilated the models hand :)
For a coloured version I included the .3mf AMS version, it is made with Bambu studio and I am not sure how well the colour maps are supported for other printers.
The stl files themselves are also included, when using the stl take care with the support settings. I had a few prints with default support settings where the arms would come lose from the support during the print leading to one armed Gandalfs. In the 3mf file the arms are heavily support painted.

If you want to bolt the base to the model you can either use a optional M3 threaded insert (M3 x 3mm, diameter = 4.6mm) with a M3 12mm bolt or use a longer bolt eg 20mm and skip the insert. (anywhere between 8mm - 30mm is ok, the smaller hole starts at 16mm)
The left hand can be push fit into the arm.
I use this with a Henson AL13 razor but it might fit others. (AL13 dimensions: The handle is tapered from 12.25 mm [.482”] at the tail to 9.75 mm [.384”] near the head. The overall handle length is 96 mm [3.780”].)