2-Liter Soda Bottle Clamp Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a clamp mount for a 2-Liter Soda Bottle. 3D Printable Files and Design Files OK, Page Description In Progress
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 758
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
This page description is a work in progress.
Use this clamp in conjunction with my 2-Liter Soda Bottle To 0.25-Inch ID Tube Adapters found here.
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design File Included: .stl .f3d, .ipt, step, .skp and obj files.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm FAST preset in Prusa Slic3r 2.3.3 with the following amendments made.
Print Settings
- 6-perimeters
- 4-top layers
- 4-bottom layers
- 20% infill
- Cubic Infill
- Monotonic Top and Bottom Pattern
- Detect Bridging Perimeters - True
Support Settings
- Contact Z Distance - 0.3mm
- Pattern Spacing - 3mm
- Pattern Angle - 45-degrees
- Interface Layers - 4
- Interface Pattern Spacing - 0.3mm
PLA Used: Polymaker PLA - https://amzn.to/35D0mbS