10 ball bearing Prusa CORE One/+/L spool-holder: Tweaks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small changes to the original model
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 394
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overall good design, fits into existing space well, rolls well. Instructions were good. Had to make some small changes. The 3mf files allowed easy modifications. Felt not needed. Extra outer lip added to cap, block prusament spools, extra inner lip to cap, caused drag, overall length went up 2.5mm. Drum sander made quick work of cleaning up the inner seam bumps, outer bumps give grip to spool.
Follow the orginal instructions
I made all the mods in Prusa Slicer, importing these into Fusion corrupted the models.
Shortened cap 1mm, removed inner and outer lip.
Orginal part OAL 86.5mm, OP part 89mm, my version 88mm
No felt needed.
Cup printed separately for seam location to be random
Once you are sure this is working right, glue the cap on the end.
For the Cup I shortened it 5mm, only needed if you are using my LED spool holder base.