1 / 5
Celestron Power Seeker 127 Eq Tripod Leg Clamp — zdjęcie 1
1 / 5

Celestron Power Seeker 127 Eq Tripod Leg Clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement leg clamp for the "Common Eq" tripod by Celestron for Telescope Power Seeker 127 Eq

Ocena
0 / 5
Polubienia
3
Pobrania
18
Wydruki
1
Wyświetlenia
99
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Replacement Leg Clamp – Celestron PowerSeeker 127EQ Tripod (Common EQ)

Tripod repair • Telescope replacement part • 3D printable clamp

This is a replacement leg clamp for the "Common Eq" tripod by Celestron for Telescope Power Seeker 127 Eq.

This replacement tripod leg clamp is designed for the Common EQ mount tripod used with the PowerSeeker 127EQ telescope by Celestron. The part was carefully modeled in Fusion 360 as a durable alternative to the original clamp, which is a component that can eventually break with regular use.

The design is optimized for PETG 3D printing, providing a good balance of strength, durability, and flexibility for real-world use on a telescope tripod. It reuses the original metal threaded insert from the broken clamp to maintain a strong and reliable screw connection. The insert is installed using heat so it bonds securely with the printed part.

Recommended Print Settings

  • Nozzle: 0.4 mm

  • Layer height: max 0.2 mm

  • Perimeters: 2

  • Infill: 50% honeycomb

  • Material: PETG

The clamp can be secured using standard 4 mm screws or aluminum rivets, depending on the preferred assembly method. For best results when printing, a 0.4 mm nozzle with a maximum layer height of 0.2 mm, two perimeters, and around 50% honeycomb infill provides a solid and reliable part.

A STEP file is included so the model can be easily modified or adapted if needed.

Tagi