1 / 3
Emerald Promise - St. Patrick's Day - Pot of Gold Hueforge — zdjęcie 1
1 / 3

Emerald Promise - St. Patrick's Day - Pot of Gold Hueforge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A vibrant rainbow arches over a lucky pot of gold, framed in ornate Celtic detail.

Ocena
0 / 5
Polubienia
2
Pobrania
4
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Emerald Promise captures the spirit of luck and folklore with a bold rainbow rising above a clover-marked pot of gold. Intricate Celtic-inspired borders and repeating shamrock motifs frame the design, while rich greens, warm golds, and bright rainbow hues create a lively, celebratory contrast against the dark background.

Perfect for St. Patrick’s décor, layered art displays, or anyone who loves a touch of whimsy wrapped in detailed, vintage-inspired design.

Project: Pot of Gold Rainbow.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.48mm and the Actual Thickness is 2.4mm

#1c1c1c PLA PolyTerra Charcoal Black Transmission Distance: 0.3
#1c254c PLA BambuLab Matte Dark Blue Transmission Distance: 1
#5ec4ea PLA Overture Matte Light Blue Transmission Distance: 1.8
#06924d PLA PolyLite Green Transmission Distance: 1
#f0be02 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5
#f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2
#ac1a17 PLA PolyTerra Army Red Transmission Distance: 0.3
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 8 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #10 (0.88mm) swap to Dark Blue
At layer #13 (1.12mm) swap to Light Blue
At layer #16 (1.36mm) swap to Green
At layer #18 (1.52mm) swap to Savannah Yellow
At layer #21 (1.76mm) swap to Sunrise Orange
At layer #24 (2mm) swap to Army Red
At layer #27 (2.24mm) swap to Ivory White for the rest.

Please note, a height modifier was applied to ensure a thicker base - this results in the layer numbers being offset by 3 layers, however the heights remain consistent.

One AMS? No problem! There is a pause included before the 4th color is completed - one method to utilize one AMS is to assign the additional colors to previously used slots when sending your print. Here is an example of my preferred method and strategy:

 

  1. Arrange the filaments in the AMS in order according to the print.
     

  2. Assign the 5th and subsequent colors to the AMS numerically.
     

  3. At the pause, replace the color in slot #1 with the 5th color, resume printing.

 

If you have more than one AMS or are manually changing filaments, 
ensure you have removed the pause before printing.

This print is part of a coordinated Hueforge series by Manic 3D Prints, a bold fusion of Celtic symbolism and gothic charm, this collection blends shamrocks, skulls, rainbows, and intricate knotwork into richly detailed, high-contrast designs. Emerald greens, deep blacks, and vintage-inspired linework create a striking balance of luck, folklore, and dark elegance. ☘✨

☘💀 St. Patrick's Day Collection 💀☘

Want to sell your physical prints of this model? A commercial license is available through my profile.

This model was created by Manic 3D Prints using Hueforge, based on a concept and idea fully developed by us. The source image was generated with the help of online tools to bring our vision to life. The 3D model itself was entirely designed and rendered by us using Hueforge as part of our original creative process.

Tagi