1 / 7
Light Blocker/Gap Filler for GSO Crayford Focuser on an 8-inch Newtonian Telescope — zdjęcie 1
1 / 7

Light Blocker/Gap Filler for GSO Crayford Focuser on an 8-inch Newtonian Telescope

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Solve the problem of light leakage between a wrong-size focuser and an 8" Newtonian telescope.

Ocena
0 / 5
Polubienia
1
Pobrania
3
Wydruki
0
Wyświetlenia
29
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution

On an 8" Newtonian telescope I inherited and now use to do variable star photometry, there's a gap between the focuser and the telescope tube -- this focuser probably wasn't meant for this telescope. Not to worry, a 3D-printed part can cover the gap!

I printed mine in PETG for heat/UV resistance, and I printed two of them, one for each side. 

I have a GSO Crayford focuser, but this would probably work on other focusers too. I used superglue to attach it to the focuser.

Even though this is a super simple design, I haven't learned to use CAD tools yet, and knew it'd be faster to have AI mock it up than fiddle with the PrusaSlicer tools that could have also done this. Gemini wrote the OpenSCAD code, from which I exported the STL file.