paint pad holder (OpenSCAD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model will hold your paint pad for applying paint. Use a paint pad instead of a paint brush.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This model will hold your paint pad. You can buy paint pad refill and you don't need to buy the applicator for holding the paint pad. This model is designed to hold BEHR brand "Edger Refill Pads for Edgers", but I think it will work with many other brands of paint pads. You can buy the "BEHR Edger Painter" for about $5 or you can print this model instead.
The model is a simple minimal design for fast printing. You can find fancier models in the collection.
Printed in PLA with standard slicer settings. No supports.
The OpenSCAD source file is included.