FlashForge Adventurer 5M Pro Top Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds the filament above your FlashForge A5M Pro
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 112
- Wydruki
- 0
- Wyświetlenia
- 781
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a top mount spool holder for the FlashForge Adventurer 5M Pro
This model specifically holds the lid open, it is designed for making direct feed filament, like TPU, easy to print.
It utilizes my own Double Sided FIller Guide which includes the original Filler Roller.
Print:
2 sets of these FillerTopLoaderLegs
1 FillerGuideDoubleSided
1 3DPNFilHoldRoller
You will also need to grab a couple 608 Bearings.
It prints flat, and needs minimal supports (just a little inside the Filler Guide mounting point)
NOTE: This setup is so low friction when printing TPU that, if the print head moves fast enough, it can pull the spool, unspooling more filament than necessary as the spool spins so freely. To resolve this, I just let the lid of the printer rest on the spool, adding atleast a small amount of friction so the spool will stop spinning if the print head moves quickly.
P.S. If you aren't ALWAYS printing TPU or other direct feed filaments, I have a Side Mount Filament Holder for the A5MP that will let you use the same Guide and Roller from this project. Just stow the legs away for the next time you need em.