1 / 8
Prusa IKEA enclosure v1 - fixes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixes I have designed to adress missing features for IKEA enclosure v1.
- Ocena
- 4,5 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 2
- Wyświetlenia
- 659
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (15)Powiązane
Fixes I have designed to adress missing features for IKEA enclosure v1 enclosure:
- spacer - 50x50x2 mm, hole diam: ø3mm - adress issue with doors opening, they were too tight as well as other plexi sides excessive tension, causing stucking on the lower table surface during opening. Spacers solved it perfectly and doors are closing and opening smoothly and all plexi are relaxed from excessive tension. Four spacers to be printed, each for one leg. They need to be mounted between legs and hinges.
- locker & base_lock - screw thru hole diam ø5mm, screw head hole diam ø11mm, lock and secure power supply against pushing it out accidentially from the mount. It happens once for me and in result power supply was hanging on the wires for a short time. This solved that issue perfectly.
All parts were printed with PETG.
Please leave your like if you appreciate my work to motivate me for more. Even better… show your make as well. Thanks!😊
Enjoy!