"Removable Spool" by GigantuanDesign for Larger Labels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A filament spool for Bambu Lab refills that can be removed for drying or to optimizing storage space.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really liked the original model by GigantuanDesign. It's really nice to be able to remove the spool from the filament without it all tangling up since the filament can be secured using velcro straps or zip ties prior to removing this spool. For me, it comes in really handy when I need to dry my filament. I print my spools from PLA and by removing them, one can prevent them from warping during drying.
However, the space for the filament label was somewhat limited on the original model. I regularly use filament by "The Filament by Spectrum" and the labels coming with the filament are quite large. So I modified the model to offer more space for the label. This version offers 60 mm x 40 mm of space for the label.
I only provide the half of the spool that I actually modified. It is fully compatible with the original model. You can get the other half of the spool as well as the locking pin on the original model's page.
Print Instructions
Printed in PLA, but any rigid filament should do
2 wall loops
15% gyroid infill
No support needed