OGX Mini Case for the Original Xbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the OGX Mini Project , to be used with the original Xbox
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
This case uses an aftermarket Xbox Breakway Cable, that you can buy on AliExpress check out here : AliExpress.
You have to cut it flush, so you can expose the solder points.
Use some type of resine glue, to fix everything in place.
You have two options here, one with the Micro USB port and a hole to see the Raspberry Pico Light, and another one whitout it.
You need a Raspberry Pico W, so you can use any Bluetooth controller with it.
This case is a result of the colaboration of the Recapeiros RetroGaming Group.
Gabe, Olveira and Lopes.
Credits for Gabe for being our tester and figuring out the pins.
Oliveira did the v2 case with the Micro USB.
I did the basic model, but none of that was possible without those two.