More Zerup Sirup, Ahead Sirup und Inlead, Universal Halter für die Sirup Flaschen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Halter für 3 verschieden Mini Sirup Flaschen. More Sirup / Ahead Sirup / Inlead Sirup.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 174
- Wydruki
- 0
- Wyświetlenia
- 611
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Universal Halter für die More Zerup Sirup, Ahead Sirup und Inlead Sirup Flaschen.
Diese sind auf der Innenseite eines Küchenschrankes Angebracht. Über den Flaschen die im Schrank stehen.
1 Version für 8 Stück mit 2 Senklöcher für Schrauben. 1 Version für 8 Stück zum Befestigen mit doppelseitigen Klebeband. Ich benutze "3M Doppelseitiges Klebeband Montageband".
Update: Ich habe die Halter jetzt erweitert. für 2 bis 6 Stück. Diese können an der Wand, an Schränken, an Innenseiten von Türen(da nehmt besser die Kippsicheren, da beim Schnellen auf und zumachen der Tür diese Kippen könnten). Es sind Halter für 2 bis 6 Stück zum Kleben. Für 2 bis 6 Stück zum Schrauben, und für 3 bis 6 Stück zum Schrauben, aber Kippsicher.
Gedruckt mit PLA. 15% Infill. Ohne Stützen.
Viel Spaß.
Universal holders for More Zerup syrup, Ahead syrup, and Inlead syrup bottles.These are mounted on the inside of a kitchen cabinet, above the bottles inside.
One version holds 8 bottles with two countersunk holes for screws. Another version holds 8 bottles and can be attached with double-sided adhesive tape. I use 3M double-sided mounting tape.
Update: I've now expanded the holders to accommodate 2 to 6 bottles. These can be mounted on walls, cabinets, or the inside of doors (use the tip-resistant ones for the latter, as they could tip over when the door is opened and closed quickly). There are holders for 2 to 6 bottles that can be glued on, 2 to 6 bottles that can be screwed on, and 3 to 6 bottles that can also be screwed on but are tip-resistant.
Printed with PLA. 15% infill. No supports.