Handheld Rubber Band Bow and Arrow – Print‑in‑Place, No Supports, Fast 20‑Minute Print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small, fast-printing toy bow powered by rubber bands can range through boxes that serve as targets.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 177
- Wydruki
- 1
- Wyświetlenia
- 514
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Please use the new version of This Model
Overview
A fast‑printing, handheld Rubber Band Bow and Arrow designed for quick setup, smooth firing, and fun target practice. This model is print‑in‑place, requires no supports, and finishes in about 20 minutes on most printers.
Key Features
Print‑in‑Place Design — No assembly required.
No Supports Needed — Clean, reliable prints on any machine.
Fast 20‑Minute Print — Great for quick gifts or demos.
Rubber Band Powered — Twist for more tension and stronger shots.
Target‑Friendly — Works great with cardboard or foam targets.
Print Settings
Layer Height: 0.2 mm
Walls: 2–3
Infill: 10–20%
Brim: None
Skirt: 1 loop recommended
Supports: Not recommended
How to Set Up the Bow
Create a small loop at one end of the rubber band.
Twist the band several times — more twists = more power.
Hook the loop onto the opposite side of the bow.
Load your arrow and fire at a safe target.
Video Tutorial:
Arrows Not Sticking? Try This Version
If your arrows aren’t sticking into the target, use the Extra Sharp Arrows V2 Model
Safety
Do not fire at people, pets, or fragile objects (windows, screens, etc.).
Use only with safe targets like cardboard or foam.