Accessory Box for Vault Assault Board Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessory box for Vault Assault board game with lid, special coin box and coin tray extension
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Our family likes to play the Vault Assault board game a lot. The original box is not big enough and has issues to fit all inside. It seems that the game license on Makerworld doesn't allow me to repost or modify original models, so here you will find only the box and additions that I made from scratch and you will have to download the game itself from the link above.
Print and Build Instructions
All models here are optimized for 0.2 mm layer height.
Case Body - print with 4 perimeters, you want to have the box robust. You can insert optional 20x6x2 magnet during print to keep the coin box inside empty box, in such case pause the print at 22.4 mm. But the magnet is not required, with cards inserted the coin box will stay where it should be without it. See the pictures.
Case Bottom - Optional, print if you want to attach the box to the board for storage. Print with 4 perimeters and attach it to the body with 4 screws M3x10 or M3x8.
Case Lid - For single color print only the NoAMS model. For multicolor combine NoAMS with Logo or use the AMS version with color smart paint in slicer. For single color keep the orientation as is, for multicolor I recommend you to print it upside down with the logo on the plate. Satin sheet for PETG or smooth sheet for PLA.
Lock Pin - Print with 6 perimeters or more and attach it to the body with M3x10 screw. Secure it with M3 nut with locking silicone ring or you can glue a regular nut with Loctite 243. Don't fasten the nut to much, you want the pin moving freely.
Coin Box - Print with 4 perimeters. If you want to insert optional 20x6x2 magnet, pause the print at 3 mm. Be sure you match the polarity with the magnet inside the box!
Cards Extension - I don't want to violate the game license, so here it's on you to merge the original Cards.stl model with this extension. Import both models in the slicer, group them and put the extension at the right side of the Cards to form a single body for print. Print it upside down with support. See the pictures for result.