Pedastal Cup | ReusserStudio
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3(or 4 depending on scaling) finger cup mother molds. Print->Plaster->Slipcast->Fire = Cup
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 174
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
To make your cup:
Print out the four files in TPU, at least 4 walls--but 6 would be better.
Paint on a thinned-out release. I use Murphy's oil soap--but any water soluble soap is fine
Mix and Fill the molds with No1 Ceramic Plaster. I like Andrew Martin's ratios.
Wait for the plaster to cure, but not too much--you want it to be still warm while you remove
Bind the handle molds together, and wait for the molds to finish curing
Casting Instructions:
Handles: Fill with slip, leave until body is ready to remove
Base: Fill with slip, leave until body is ready to remove
Body: Fill with slip. Wait 10-11 mins--check thickness of overspill. Target thickness is 2-3mm, but thicker is acceptable. Empty of slip once desired thickness achieved. Wait at least additional 30 mins, or more depending on ambient humidity and temperature.