Ubiquiti U7 Pro-Wall Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand for Ubiquiti U7 Pro-Wall without needing a mounting plate
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer: This is a model created by a colleague of mine. He allowed me to upload this model so others can use it aswell! Many thanks to him!
This is a stand for the Ubiquiti U7 Pro-Wall. It was printed with ABS and fits very well. PLA doesn't work, as the U7 Pro-Wall gets a bit warm when powered on and the PLA starts to bend. PETG has not been tested yet. Organic support structures were used. Please take care when removing the support material, as the thin section is prone to breaking. But can't be modified due to geometry and dimensions of the AP. Compared to similar models, this stand doesn‘t need a mounting plate, which is a huge advantage!
If any questions occur, please feel free to use the comments section :)